»  Activ8
Minimizes blocked pore throat capillaries due to filtrate invasion. On a molecular level, reduces interfacial tension between water or acid/water and oil.

»  AlphaMOD
Improves hole cleaning by increasing viscosity and gel strengths. Provides a thinning fluid more sheer than a pure organophilic clay viscosified system. An effective rheology modifier, especially in large volume, high angle wellbores.

»  AminaMAX Plus
An effective clay inhibitor for water sensitive formations.

»  BASEblok
Produces a non-damaging, tough filter cake with good regain. Deforms easily to plug fractures.

»  BITglide II
Lubricant for water-based systems with low hardness and low pH. High film strength and persistence with low depletion rate.

»  BLOK
Produces a non-damaging, tough filter cake with good regain. Deforms easily to plug fractures and increases ECD window.

»  Clearex
Effective plugging material designed to seal fractures, pores and vugs in formations. Available in various particle sizes to match specific loss zone characteristics.

»  Control CF
Designed to seal off cleat network in coal seams and remain in place whether pumps are on or off.

»  Control Seal
A deforming bridging agent also used for wellbore strengthening.

»  CorrSTOP
Corrosion protection and oxygen scavenger in brines and water-based drilling fluids. Effective against carbon dioxide and hydrogen-sulfide induced corrosion.

»  Extendrill
Proprietary lubricant for brines including CaCl2, NaCL, Produced Water and KCI. Extremely low coefficient of friction compared to other lubricants.

»  Extendrill MAX
Added in reduced quantities as minor additions are extremely effective at reducing the coefficient of friction for all oil-based fluids. Provides optimum wellbore lubricity.

»  FormaGlide
Added in reduced quantities as minor additions are extremely effective at reducing the coefficient of friction for all oil-based fluids. Provides optimum wellbore lubricity.

»  Hydro CI
Corrosion inhibitor for monovalent and divalent brines such as potassium chloride, sodium chloride and calcium chloride. Tough film forming amine.

»  HydroSCAV O2
Mitigates drill string and surface equipment corrosion associated with brine drilling. Eliminates the need for diesel caps and chem barrel modifications required for Sodium Sulphite.

»  LO2
Designed to provide operators with a concentrated liquid oxygen scavenger for use in a wide variety of drilling fluids and brines. Solids free. Will not form precipitates.

»  M.P.G.
A proprietary blend of products engineered to establish a low permeable bridging agent. The agent reduces fluid invasion and enhances wellbore stability of severely depleted and/or unconsolidated formations through malleable characteristics.

»  Remedy
Combats moderate to severe whole mud losses in oil and low MBT water-based drilling fluids. Applied as a sweep, squeeze or whole system additive. Can be applied as pre-treatment for anticipated thief zones or as a sweep ahead for cement volumes.

»  Rocky Mountain Wetter
A Canadian supplied surfactant blend that improves oil wetting properties of oil mud systems. All additives blended to create the wetter are Canadian sourced products.

»  SECUREShield
Bitumen encapsulation to prevent accretion on drilling components and solids control equipment.

»  Wellflux
A proprietary water-soluble polymer product used to reduce the viscosity of heavy oils and bitumen by producing a dispersion.